Specifications

Device View The SPECTRUM Model
Device Management Page 39 SmartSwitch 9000/9500 Series
Input Voltage
The UPS’s measured utility input voltage. The
value is determined by dividing the value of the
field by 10.
Output Voltage
The measured UPS output voltage. The value is
determined by dividing the value of the field by
10.
Output Power (Watts)
The UPS’s output load expressed as a percentage
of rated load in watts.
Environmental Module Information
Within the Device Chassis view are the COM 1,
COM 2, and the FNB fields which provide
additional information for the connections on the
Environmental Module. Figure 12 shows the
relationship between the Device view and the
corresponding front panel of the Environmental
Module of the SmartSwitch 9000 chassis.