Specifications

Device View The SPECTRUM Model
Device Management Page 37 SmartSwitch 9000/9500 Series
modes of operation. The run time estimate is
based on available battery capacity and
output load.
UPS Details View
Access: From the Icon Subviews menu for the
UPS/Battery section of the Chassis Device View, select UPS
Details.
This view provides the following information on
the UPS battery.
Index
An unique value that identifies a particular UPS.
Name
The name of the UPS.
Model Type
The model type of the UPS.
Battery Capacity
The UPS’s remaining battery capacity expressed
as a percent of the fully charged condition. The
value of this object is the actual percentage
multiplied by 10.
Operational Status
The operational status of the UPS. Possible
entries are: on-line, on-battery, overloaded,
low battery, replace battery, smart boost,
sleep, and run time calibration running.
UPS Configuration Information View
Access: By double clicking on an entry in the UPS Detail
view.
This view displays information on the condition,
status and the input/output power of a particular
UPS. This view contains the following:
Identification
This section of the UPS Configuration Information
View contains entries that uniquely identify a
particular UPS.
Index
A unique value which identifies a particular UPS.
Name
A name given to a particular UPS.
Model Type
The UPS’s base model type.
Firmware
The UPS’s firmware version.
Serial Number
The UPS’s serial number as set at the factory.
Manufacture Date
The UPS’s date of manufacture, in the format
mm/dd.