Specifications

Device View The SPECTRUM Model
Device Management Page 32 SmartSwitch 9000/9500 Series
Backplane Module Icon
This icon displays a logical representation of the
physical module, its location in the chassis, its
backplane interfaces and its ports. Figure 10
shows an example of the Backplane Module icon.
Module Identification Labels
These labels display the following information:
Slot Number Label
This label displays the location of the module
within the chassis.
Model Type Label
This label displays the type of network interface
module in the chassis slot.
Model Name Label
This label displays the type of network interface
module in the chassis slot.
SMB 1 and SMB 10 Icons
The System Management Bus (SMB) icons
represent the connections between the module
and the SMB 1 and SMB 10. Table 8 describes
the possible operational states.
Table 8: SMB 1 and SMB 10 Status
Descriptions
Color Status Description
Blue OFF The module is not connected to the
SMB.
Green ON The module is connected to the SMB.
Yellow TST The interface is in the test state.
Grey - - - The interface could not be found for
this module.
Red - - - Problems have occurred reading and
determining the status of the interface.