Specifications

Device View The SPECTRUM Model
Device Management Page 23 SmartSwitch 9000/9500 Series
Interface Options Panel
This area of the Interface Device view (Figure 4)
allows you to modify the presentation of a
highlighted icon. Double-click a non-text area of
this panel to open the Gauge Control Panel view
described later in this chapter. The Interface
Options panel provides the information described
below.
Filter
This menu button allows you to select the
application to be displayed by the Interface icons.
You can select the following applications: 801.1Q
VLAN, Physcial, Spanning Tree, and Bridging.
This will provide new Configuration view off the
Interface Icon subviews menu. For Further
information see the Spanning Tree views in the
Bridging Applications documentation. You may
choose IP routing if the SPECTRUM Routing
Services Management Module is loaded. For more
information, refer to the Routing Services
Management Module Guide.
Interface Description
This field provides a description of the highlighted
interface. If no interface is highlighted, this field
is empty or shows the interface previously
highlighted.
Interface Icon Subviews Menu
Selections
Table 5 describes each of the Icon Subviews
menu selections, available from the interface
icon, that are available to all or most of the
devices available to the SmartSwitch 9000 Series.
Depending on the device type. Some of these
views may not be available.
Table 5: Interface Icon Subviews Menu
Selections
Option Opens the...
Configuration Port Configuration - CSIIf Port View
(Page 52).
Secondary Address
Panel
Secondary Address Panel View.
Model Information Model Information View (Page 53).