Specifications

Device View The SPECTRUM Model
Device Management Page 22 SmartSwitch 9000/9500 Series
Port Type Label
This label displays the type of network interface
module.
MAC Address Label
This label displays the physical (MAC) address of
the interface. Double-click the label to open the
Interface Address Translation table, which cross-
references network addresses (IP addresses) to
physical (MAC) addresses for selected nodes
between networks. Double-clicking on any
column entry opens an address-specific Address
Translation Table Information view. This view
provides the same information as the
corresponding row for the IF Address Translation
table, but allows you to modify field values.
Network Information Label
This label displays a user-selectable network
information field. You can select the field to
display (Network Address, Name, or Subnet Mask)
using the interface options panel. The default
field is the Network Address. Double-click this
label to access the Secondary Address Panel
described in SPECTRUM Views.
Gauge Label
This label displays the color of the statistic
selected for the Interface icon from the Gauge
Control Panel described in SPECTRUM Views
and provides double-click access to the
Performance view.
As an example, Table 4 lists the attributes
available for the 9A656-04 ATM Interface icon.
Table 3: Administrative Status for the
Bridging Application
Color Status Description
Green FWD Bridge port is forwarding.
Blue DIS Port is disabled.
Magenta LST Bridge is in the listening mode.
Magenta LRN Bridge is in the learning mode.
Orange BLK Bridge port is in the blocking
mode.
Red BRK Bridge port is broken.
Blue ??? Status is unknown.
Table 4: ATM Interface Attributes and
Corresponding Color
Selected Attribute Color
Load (In/Out) Green
Octets (In/Out) Violet
Cells (In/Out) Blue
Error Cells (In) Orange