Specifications

Device View The SPECTRUM Model
Device Management Page 21 SmartSwitch 9000/9500 Series
Interface Icons
Figure 4 shows a close-up of an Interface icon
from an Interface Device view. Most of the
informational labels on the icon also provide
double-click access to other views, as explained in
the following label descriptions.
Figure 4: Interface Icon
Interface Number Label
This label displays the number identifying this
interface. The first number represents the slot
that this module resides in. The second number
represents the interface number on this module.
Interface Status Label
This label displays the current Operational Status
of the interface. It also provides double-click
access to the Port Configuration - CSIIf Port View
(Page 52).
Table 2 and Table 3 list the possible states
relative to the application selected. The default
application for this view is Physical (MIB-II). To
select the application to be displayed (Physical or
Bridging), click the Filter menu button in the
Interface Options panel.
(c)
(d)
(e)
(f)
(a) (b)
a Interface Number Label
b Interface Status Label
c Port Type Label
d MAC Address Label
e Network Information Label
f Gauge Label
AT M
20403
ON
0
0
In:
Out:
ATM Interface
(a)
(b)
Gauge Label
FDDI
0:0:1D:17:2F:3C
0
fnb
ON
Table 2: Interface Status for the Physical
Application
Color Status Description
Green ON Port is operational.
Blue OFF Port is off.
Yellow TST Port is in the test mode.