Specifications

9031755 E6 MicroMMAC -T Network Application
5-7
The Network Application
Cabletron Token Ring Ring Configuration View
Table button, and the Cabletron Token Ring Station Alarm Thresholds view,
accessed via the Alarms Table button.
Click this button to access the Cabletron Token Ring Station Non-Isolating
Errors view. This table shows the number of Lost Frames, Congestions,
FrameCopied, Token, and Frequency errors for each station on the ring.
Click this button in any of the Station Table views to access the Cabletron
Token Ring Station Alarm Thresholds view. This view lists the threshold for
the Line, Burst, A/C, Internal, and Congestions errors for each station on the
ring.
Cabletron Token Ring Ring Configuration View
This view displays the following Ring Configuration:
• Ring Name - -- You may define this by highlighting the text box and
entering the desired name.
• Ring Number --Read Only
• Ring Speed --Read Only
• Ring Status --Read Only
• Active Monitor --Read Only
• Active Stations --Read Only
• Beacon Recovery --You may choose Disabled, Enabled, or Invalid for the
Beacon Recovery status.
Setting Alarms for the Ring
To set alarm thresholds for the ring, follow the steps below.
1. Enter the desired threshold for the errors listed in the view.
• Ring Purges
• AMP Errors
• Claim Token Errors
• Lost Frames
• Token Errors
• Beacon State
• Frame Count
Non-Isolating Errors Table
Alarms Table