Specifications

The Network Application
Isolating Errors Table
MicroMMAC -T Network Application MicroMMAC-T
5-6 Management Module Guide
Click this button to organize the entries for the chosen table entries into
ascending or descending order. Toggling the button so that it displays Un-sort
will undo any order previously specified.
Click this button to access the Cabletron Token Ring Station Detail view. The
Station Detail view breaks down the stations’ traffic into frames and errors
and displays this information in a color-coded pie chart. Two other pie charts
display the Isolating Errors and Non-Isolating Errors statistics. The Station
Detail view also displays the up and downstream neighbors of the station,
provides access to the Cabletron Token Ring Station Alarms Configuration
view (described later in this chapter), and allows you to enable a station’s
removal from the ring if alarm thresholds are surpassed.
Click this button to access the Station Alarm Dialog box. To configure an
alarm for a particular station, follow the steps below.
1. Enter thresholds for Line, Internal, Burst, A/C and Congestion errors.
2. Click on the desired button to Enable or Disable each alarm.
3. Move the stations you’d like to apply the alarm configurations to into the
Apply Settings to: list by double-clicking on the station’s MAC address in
the Stations list or by highlighting the station’s address and clicking the
navigation buttons that are between the two lists.
4. Click the Apply button to set the alarms for the selected stations.
Click this button to remove the highlighted station from the ring. A dialog box
will prompt you to confirm the removal of the station.
Isolating Errors Table
The Cabletron Token Ring Station Isolating Errors view, accessed via the
Station Table view’s Isolating Errors button or the Icon Subviews menu for
the Network application, lists the number of Line, Burst, A/C, Abort, and
Internal errors for each station on the ring. The Isolating Errors view provides
access to the Non-Isolating Errors Table, via the Non-Isolating Errors
Sort Up/Sort Down/Un-sort
Station Detail
Station Alarms
Remove Station