Specifications

MicroMMAC-T Events and Alarms
Event and Alarm Messages MicroMMAC-T
4-26 Management Module Guide
Event0042023e
{d "%w- %d %m-, %Y - %T"} - TR
TPIM INSTALLED - Device {m} of
Type {t} reported a TPIM was
inserted on Board {I 1}, Port Group
{I 2}, Port {I 3}. - (event [{e}])
No probable cause message
Event0042023f
{d "%w- %d %m-, %Y - %T"} - TR
TPIM REMOVED - Device {m} of
Type {t} reported a TPIM was
removed on Board {I 1}, Port Group
{I 2}, Port {I 3}. - (event [{e}])
No probable cause message
Event00420240
{d "%w- %d %m-, %Y - %T"} -
NEIGHBOR NOTIFICATION
FAILED - Device {m} of Type {t}
reported that neighbor notification
process has not completed on Ring
{I 1}. - (event [{e}])
No probable cause message
Event00420241
{d "%w- %d %m-, %Y - %T"} -
FAULT RECOVERY
OSCILLATION - Device {m} of Type
{t} reported that Ring {I 1} is
oscillating. - (event [{e}])
Prob00420241
FAULT RECOVERY OSCILLATION
SYMPTOMS:
The Ring is oscillating. Oscillation occurs
when the Ring fails a short time after
recovery.
Event00010810
{d "%w- %d %m-, %Y - %T"} -
RMON rising threshold trap
received from model {m} of type {t}.
AlarmIndex {I 1}, AlarmVariable {O
2}, AlarmSampleType {I 3},
AlarmValue {I 4} and
AlarmRisingThreshold {I 5}. (event
[{e}])
Prob00010810
Remote Monitor Rising Alarm Threshold
Exceeded
This trap will be generated when the value
of the trap exceeds the rising threshold for
the alarm.
Table 4-1. MicroMMAC-T Events and Alarms (Continued)
Message in the Event Log
Alarm View Probable Caulse
Message