Specifications

9031755 E6 Event and Alarm Messages
4-25
MicroMMAC-T Events and Alarms
Event0042022a
{d "%w- %d %m-, %Y - %T"} -
STATION REMOVE FAILURE -
Device {m} of Type {t} reported that
Station {X 2} could not be Removed
from Ring {I 1} after three attempts.
Prob0042022a
RING SECURITY BREACH - STATION
REMOVE FAILURE
Unauthorized Station has attempted and
succeeded in attaching itself to the Ring.
After 3 consecutive tries, the Station was not
successfully removed from the Ring.
Event0042023c
{d "%w- %d %m-, %Y - %T"} - RING
SPEED FAULT - Device {m} of Type
{t} reported that Board {I 1}, Port
Group {I 2}, Port {I 3} has entered
the Ring Speed Fault State. - (event
[{e}])
No probable cause message
Event0042023d
{d "%w- %d %m-, %Y - %T"} - RING
SPEED FAULT CLEARED - Device
{m} of Type {t} reported that Board
{I 1}, Port Group, {I 2}, Port {I 3} has
left the Ring Speed Fault State. -
(event [{e}])
No probable cause message
Event0042022b
{d "%w- %d %m-, %Y - %T"} - RING
SECURITY BREAK - Device {m} of
Type {t} reported that a Token Ring
Station Port was removed during a
security recovery. Board {I 1}, Port
Group {I 2}, Port {I 3}.
No probable cause message
Event0042022d
{d "%w- %d %m-, %Y - %T"} - PORT
GROUP REMOVED DURING
FAULT RECOVERY - Device {m} of
Type {t} reported Board {I 1} Port
Group {I 2} was Bypassed. - (event
[{e}])
No probable cause message
Table 4-1. MicroMMAC-T Events and Alarms (Continued)
Message in the Event Log
Alarm View Probable Caulse
Message