Specifications

9031755 E6 Event and Alarm Messages
4-19
MicroMMAC-T Events and Alarms
Event00420229
{d "%w- %d %m-, %Y - %T"} -
STATION REMOVED - Device {m}
of Type {t} reported that Station {X
2} on Ring {I 1} has been Removed
from the Allowed Station List. -
(event [{e}])
Prob00420229
RING SECURITY BREACH - STATION
REMOVED
Unauthorized Station has attempted to
attach itself to the Ring.
Station was successfully removed from the
Ring.
Event0042022c
{d "%w- %d %m-, %Y - %T"} - PORT
REMOVED DURING FAULT
RECOVERY - Device {m} of Type {t}
reported that Board {I 1}, Port
Group {I 2}, Port {I 3} was Removed
from the Ring during a Fault
Recovery Condition. - (event [{e}])
Prob0042022c
PORT REMOVED DURING FAULT
RECOVERY
SYMPTOMS:
A Port was Removed from the Ring during a
Fault Recovery Condition.
PROBABLE CAUSES:
1) Bad cable connected to Removed Port.
2) Device connection is bad at other end of
the cable.
RECOMMENDED ACTIONS:
1) Check cable connected to Removed Port.
2) Check Device connection at other end of
the cable.
3) After problem is resolved, Enable the
Removed Port.
Table 4-1. MicroMMAC-T Events and Alarms (Continued)
Message in the Event Log
Alarm View Probable Caulse
Message