Specifications

9031755 E6 Event and Alarm Messages
4-15
MicroMMAC-T Events and Alarms
Event0042021a
{d "%w- %d %m-, %Y - %T"} -
STATION BURST ERRORS
THRESHOLD EXCEEDED - Device
{m} of Type {t} reported that Station
{X 3} has Exceeded the Burst Errors
Threshold Value of {I 1} within the
Timebase Value of {I 2}. - (event
[{e}])
No probable cause message
Event0042021b
{d "%w- %d %m-, %Y - %T"} -
STATION A/C ERRORS
THRESHOLD EXCEEDED - Device
{m} of Type {t} reported that Station
{X 3} has Exceeded the A/C Errors
Threshold Value of {I 1} within the
Timebase Value of {I 2}. - (event
[{e}])
No probable cause message
Event0042021c
{d "%w- %d %m-, %Y - %T"} -
STATION RECEIVER
CONGESTION THRESHOLD
EXCEEDED - Device {m} of Type {t}
reported that Station {X 3} has
Exceeded the Receiver Congestion
Threshold Value of {I 1} within the
Timebase Value of {I 2}. - (event
[{e}])
No probable cause message
Event0042021d
{d "%w- %d %m-, %Y - %T"} -
STATION REMOVE FAILURE -
Device {m} of Type {t} reported that
Station {X 1} could not be Removed
from the Ring after three attempts.
Prob0042021d
RING SECURITY BREACH - STATION
REMOVE FAILURE
Unauthorized Station has attempted and
succeeded in attaching itself to the Ring.
After 3 consecutive tries, the Station was not
successfully removed from the Ring.
Event00420220
{d "%w- %d %m-, %Y - %T"} - PORT
INSERTED - Device {m} of Type {t}
reported that a Station has been
Inserted into Board {I 1}, Port
Group {I 2}, Port {I 3}. - (event [{e}])
No probable cause message
Table 4-1. MicroMMAC-T Events and Alarms (Continued)
Message in the Event Log
Alarm View Probable Caulse
Message