Specifications

MicroMMAC-T Events and Alarms
Event and Alarm Messages MicroMMAC-T
4-6 Management Module Guide
Event00420202
{d "%w- %d %m-, %Y - %T"} - PORT
DEINSERTED - Device {m} of Type
{t} reported that a Station has been
DeInserted from Port {I 2} in
Module {I 1}. - (event [{e}])
No probable cause message
Event00420203
{d "%w- %d %m-, %Y - %T"} - RING
SPEED FAULT - Device {m} of Type
{t} reported that Module {I 1} has
entered the Ring Speed Fault State.
- (event [{e}])
Prob00420203
RING SPEED FAULT
SYMPTOMS:
A Token Ring Module has entered the Ring
Speed Fault State.
PROBABLE CAUSES:
1) A Station or Ring Port attaching with a
different speed than this Module is
configured for.
RECOMMENDED ACTIONS:
1) Detach the Station or Ring Port from the
Module.
2) Re-configure the Station or Ring Port
speed to match the speed of the affected
Module.
3) Re-attach the Station or Ring Port to the
Module.
Event00420204
{d "%w- %d %m-, %Y - %T"} - RING
SPEED FAULT CLEARED - Device
{m} of Type {t} reported that Module
{I 1} has left the Ring Speed Fault
State. - (event [{e}])
No probable cause message
Table 4-1. MicroMMAC-T Events and Alarms (Continued)
Message in the Event Log
Alarm View Probable Caulse
Message