Specifications

9031755 E6 Device View
2-15
Interface Device View
Gauge Control Panel
Gauge Mode
This area of the Gauge Control panel allows you to select the mode presented
by the Logical Gauge. Possible selections are Totals, Rates, or Percentages.
The Percentages selection represents the percentage of the interface compared
to the rest of the interfaces. Table 2-4 shows the displayed attributes and their
color definitions if the Totals mode is selected. Table 2-5 shows the displayed
attributes and their color definitions if the Rates mode is selected.
Table 2-4. GaugeTotals Mode Attribute and Color Definitions
Selected Attribute Color
Errors Orange
In Packets Lt. Blue
Out Packets Lt. Blue
In Octets Green
Out Octets Green
Discards Tan
Forwarded Lt. Purple
Host Bound Yellow
Transmitted White
Filtered Gray
Table 2-5. GaugeRates Mode Attribute and Color Definitions
Selected Attribute Color
Load Green
Load In Green
Load Out Green
Packet Rate Lt. Blue
In Packet Rate Lt. Blue
Out Packet Rate Lt. Blue
% Discard Tan
% Filtered Gray
% Forwarded Lt. Violet
% Host Bound Yellow