Specifications

ST1kChnlApp TDM Channel Configuration
SPECTRUM Enterprise Manager 96 of 194 Ascom TimePlex ST-1000
derived from the port or bundle on which the
channel is configured, which is always
0 for
server ports. The values
1 - 10 are reserved by ST-
50, of which
1 is for voice, 2 is for switch 56, and
3 is for clear channel. The values 11 and up can
be used to define user-specific device types. For
TDM channels connected between I/O ports, the
channel will not connect if the device types do not
match. For I/O to server port connections, the
device types will not be compared.
Profile
A value ranging from
1 to 225 , with 1 being the
default value.
Orig
For EMS usage, the value is
yes or no (the default
value).
PartitionID
A read-only value used by the security server to
enforce shared node.
DestChkMode
Indicates if the remote node ID and remote
address in the destination's channel MIB need to
verify the source's node ID and address before
allowing a channel connection. The possible
values are
enable or disable (the default value).
ConnectMode
Indicates whether a channel should be
automatically connected when a port comes up or
if the user is responsible for connecting the
channel. The possible values are
autoConnect or
userInitiate (the default value).
State
If this value is connected , the Channel Status is
also set to
connected . If the value is processing ,
the Channel Status is set to any value besides
connected and disconnected . For all other
values, the Channel Status is set to
disconnected and this field specifies the reason
for the disconnection. The default value is
notApplicable .
SplPrfType
Specifies the type of special profile that is used on
this channel connection. The possible values are
voiceProfile , dataProfile , and none (the
default value).
DestNodeType
Defines the type of the destination node for this
channel. If set to
link , the LGM translation table
entry indexed by the value of ChannelDestAddr
will be allocated. If this field has an illegal
translation table index value, the command
should fail. The possible values are
link and st
(the default value).