Specifications

ST1kChnlApp TDM Channel Configuration
SPECTRUM Enterprise Manager 95 of 194 Ascom TimePlex ST-1000
PCMPhSize
The size of the phasor (in bytes) on the PCM (64K)
side of any voice connections using this voice
profile. This field is ignored for PCM and ECELP-
FR voice channels. The default value is
16 .
SubratePhSize
The size of the phasor (in bytes) on the subrate
side of any voice connections using this voice
profile. This field is ignored for PCM and ECELP-
FR voice channels. The default value is
16 .
NetSigMode
Enables autodetection of CELP/ATC channel
connected equipment so as to automatically
change format to become compatible with either
LINK (5 byte) or ST (8 byte) channel modes.
Alternately, this field hard sets CELP/ATC
channels to be compatible only with either LINK
or ST mode compatible equipment. This field is
ignored for PCM, ADPCM, and ECELP-FR. The
possible values are
auto , link , and st (the
default value).
TDM Channel Configuration
Unless stated otherwise, all fields in this view are
read-write. Double-click an entry to access the
Detail view and make any changes.
ChannelAddr
A read-only field giving the channel address.
DestNodeID
The destination node address.
DestAddr
The destination channel address.
ControlMode
Indicates whether the channel can be used in a
connection request. The possible values are
enable , erase , and disable (the default value).
erase is used to wipe out the channel
configuration MIB. Setting this to
erase will not
succeed if the channel is not disconnected.
Update
A read-only value that can be either
loaded or
resetReq (the default value).
ModuleType
A read-only value that gives the type of module on
which this channel endpoint is located. This is
derived from the port or bundle on which the
channel is configured. The possible values are
t1m , e1m , sgm , lgm , asm , fsm , sdm , sgmAg , rtm ,
brm , dsm , and e3m .
DeviceType
A read-only value that gives the type of device
connected to this channel endpoint. This is