Specifications

ST1kChnlApp Network/Nodal Voice Profile Administration
SPECTRUM Enterprise Manager 93 of 194 Ascom TimePlex ST-1000
enabled, fax operation is supported over the
connection.
FaxNSFMode
Controls the nonstandard fax mode on voice
connections that use this voice profile. The
possible values are
enable and disable (the
default value). For PCM and ADPCM voice
channels, this field is ignored.
VocoderEnab
The possible values are
disable and normal (the
default value). This field controls the vocoder
mode on any voice connections that use this voice
profile. This field is ignored for PCM and ADPCM
voice channels.
NetDataMode
Controls the 2100 Hz detection logic and data
mode operation with the ATC vocoder on voice
connections that use this voice profile. The
possible values are
enable and disable (the
default value). This field is only used for ATC voice
channels. This field is ignored for all other types
of voice channels.
Sig Type
The type of signaling used by the T1M/E1M
bundles that connect to voice ports using this
voice profile. The possible values are
a , ab , abcd ,
ac15-dtmf , ac15-dp , and none (the default value).
SigIdlePttrn
Defines the idle signaling pattern on any ASM
voice ports that use this voice profile. This pattern
is delivered to receive signal channel connections
at times prior to the availability of a verified
reliable signal channel source. The possible
values are given below. The default value is
a0-
b0-c0-d0
.
Nodal Voice Profile Table
This table within the Networkwide/Nodal Voice
Profile Administration view provides voice profile
entries that serve as a nodal part of the profile for
voice connections. It is intended for individual
fine adjustment of the voice parameters on each
end of the connection. A given value refers to the
a0-b0-c0-d0 a0-b0-c0-d1
a0-b0-c1-d0 a0-b0-c1-d1
a0-b1-c0-d0 a0-b1-c0-d1
a0-b1-c1-d0 a0-b1-c1-d1
a1-b0-c0-d0 a1-b0-c0-d1
a1-b0-c1-d0 a1-b0-c1-d1
a1-b1-c0-d0 a1-b1-c0-d1
a1-b1-c1-d0 a1-b1-c1-d1