Specifications

ManualsBrandsCabletron Systems ManualsConsumer electronicsST-500

100

Table Of Contents

Title
Notice
Contents
Introduction
- Purpose and Scope
- Required Reading
- Supported Devices
- The SPECTRUM Model
Performance Views
- Port Performance View
- Device Performance View
Interface Device View
- Interface Icons
- Interface Icon Labels
- Interface Status View
- Interface Address Translation Table
Device Topology View
Applications Views Summary
St1kNodeApp
- Node Administration
- System Profile Administration
- Partition and Softload Administration
- Node Status
- Nest Administration
- Channel Profile Administration
- Community Administration
- Hardware Resource Engine Administration
  - Hardware Resource Engine Information
  - Hardware Resource Engine Configuration
ST1kAccessApp
- Access Control
- CPI/Modem Access Control
  - CPI Port Configuration
  - Modem Port Configuration
- Root Node IP Access Information
- Root Node IP Access Config
ST1kModuleApp
- Slot Configuration
- Slot Status
- NCP Module Status
- NCP Flash PROM Status
- Port Status Administration
ST1kLgmApp
- LGM Port Administration
- LGM Routing Table
- LGM Resource Administration
- LGM Translation Administration
- LGM Module Status
- LGM Port Status
- LGM Port Statistics
ST1kFsmApp
- FSM Module Status
- FSM-16 Resource Administration
- FSM-64 Resource Administration
ST1kSgmApp
- Sgm/Ag Module Status
- SAF Status Administration
ST1kAd10App
- AD 10 Configuration Administration
- AD 10 Status Administration
- AD 10 Statistics
ST1kRtmApp
- RTM Port Administration
  - Rtm Port Table
  - AD-3 and AD-7 Port Configuration Table
- RTM Specific Status
- RTM Port Application Status
- RTM Port Statistics
ST1kChnlApp
- Network/Nodal Voice Profile Administration
  - Networkwide Voice Profile Table
  - Nodal Voice Profile Table
- TDM Channel Configuration
- General Channel Status
- Trunk Group Application Status
- Trunk Group Contents Status
- Packet Channel Source- Destination Statistics Administration
- Packet Channel Bypass Statistics Administration
ST1kINLApp
- Inter Nodal Link Configuration
- Inter Nodal Link Status
- Inter Nodal Link Contents Status
- Inter Nodal Link Statistics
ST1kFrmRlyApp
- Packet Channel Status/Ping View
  - Packet Channel Status Table
  - Packet Channel Ping Table
- Frame Relay Channel Administration View
- Frame Relay Port Administration View
- Packet Port Statistics View
ST1kBundleApp
- Bundle Configuration
- Bundle Status
ST1kE1PortApp
- E1M Port Configuration
- E1M Port Statistics
ST1kT1PortApp
- T1M Port Configuration
- T1M Port Statistics
ST1kSdmPortApp
- SDM Port Configuration View
ST1kAsmApp
- ASM Resource Utilization
- ASM Module Status
- ASM Engine Status
- Application Status
ST1kVoiceApp
- ASM Voice Application Administration
- ASM Voice Application Status
- ASM Voice Port Statistics
ST1kAsmX50App
- X50 Configuration Administration
  - X50 Port Administration
  - X50 Circuit Administration
- ASM X50 Status
  - X50 Port Status Administration
  - X50 Circuit Status Administration
- ASM X50 Statistics
ST1kDsmApp
- DSM Module Specific Entry
  - Module Implementation Administration
  - Module CDR Implementation Administration
- DSM Module Specific Status
- DSM Module Statistics
ST1kDsmPortApp
- DSM Port Configuration
- DSM Port Specific Administration
- DSM D-Channel Port Statistics
ST1kAlarmApp
- Alarm Partition Header/System Profile
- Alarm Log Table
Device Configuration View
Model Information Views
Index
- A
- B
- C
- D
- F
- G
- H
- I
- L
- M
- N
- O
- P
- Q
- R
- S
- T

ST1kChnlApp Network/Nodal Voice Profile Administration

SPECTRUM Enterprise Manager 92 of 194 Ascom TimePlex ST-1000

ﬁeld Control Mode, the value of which is

enable

Entry one cannot be disabled or erased.

Changes for all entries take effect immediately on

new connections; however, they do not affect

channels that are already connected.

Networkwide Voice Proﬁle Table

This table within the Networkwide/Nodal Voice

Proﬁle Administration view contains the following

ﬁelds. Except for Index, all ﬁelds provide read-

write values.

Index

Index of the voice proﬁle entry.

CntrlMode

The possible values are

enable

disable

, and

erase

. The default value is

disable

, which

prevents this voice proﬁle from being applied to

any new voice connections.

Erase

removes this

voice proﬁle from the table.

CompressMode

Deﬁnes which compression algorithm to use for

voice channels connected using this voice proﬁle.

The possible values are

tCelp

atc

adpcm

ecelp-fr

, and

pcm

(the default value).

Speed

The compressed channel data rate for any voice

subrate connections using this voice proﬁle, in

the format b<bps>. For example, the value 5.333

Kbps would be entered as

b5333

. For channels

using a CELP compression algorithm, only rates

of 5.333, 7.2, 8, and 9.6 Kbps are supported. For

channels using the ATC compression algorithm,

only rates between 7.466 and 32 Kbps (in

increments of 533 bps) are supported. For

channels using the ADPCM compression

algorithm, only rates of 31.733 and 32.000 Kbps

are supported. For channels using the ECELP

frame relay compression algorithm, only rates of

4.8, 7.466, and 9.6 kbps are supported. For

channels using PCM (uncompressed mode), only

the rate of 64 Kbps is supported. The default

value is

b64000

DTMF Rly

Controls the DTMF relay on voice connections

that use this voice proﬁle. The possible values are

disable

and

enable

(the default value). When

enabled, DTMF signals are transferred through

the connection. This ﬁeld is ignored for PCM and

ADPCM voice channels.

Fax Rly

Controls the fax relay on voice connections that

use this voice proﬁle. The possible values are

disable

and

enable

(the default value). When