Specifications

ST1kRtmApp RTM Port Statistics
SPECTRUM Enterprise Manager 90 of 194 Ascom TimePlex ST-1000
channel loopback test; bit 2 equals SCC-chip D-
channel loopback test; bit 3 equals U-interface
loopback test; bit 4 equals CPI loopback test; bit 5
equals PROM ID checksum; bit 6 equals port
status checksum; and bits 7 through 15 (MSB)
are reserved. The bit value 1 means test failure.
PortDiagResult
A read-only value giving the AD-x port internal
diagnostics result. The bit mask is read from right
(LSB) to left (MSB) and represents corresponding
element numbers. A bit set to 1 means the
diagnostics failed; 0 means it passed.
CpMode
A read-write field setting the CPI console
passthrough mode. The possible values are
enable and disable (the default value).
CpSpeed
A read-write field setting the CPI console speed
value. The possible values are
a19200 and a9600
(the default value).
RTM Port Statistics
This view provides the following fields.
Addr
The RTM port address.
UIFarEndBlkErr
The count of the RTM port U-interface far end
block errors. It is a count that is being kept by the
RTM module.
UINearEndBlkErr
The count of the RTM port U-interface near end
block errors. It is a count that is being kept by the
RTM module.
AdUIFarEndBlkErr
The count of the RTM port U-interface far end
block errors. It is a count that is being kept by the
RTM AD module.
AdUINrEndBlkErr
The count of the RTM port U-interface near end
block errors. It is a count that is being kept by the
RTM AD module.
OOSTransitions
The count of the RTM port OOS transition
occurrences. It is a summary of the events for all
the elements on the port.