Specifications

ST1kRtmApp RTM Port Application Status
SPECTRUM Enterprise Manager 89 of 194 Ascom TimePlex ST-1000
DS0 connections that could still be made
assuming no more SAF connections are made.
SafsUsed
The current number of SAF connections from AD-
x units on this module.
SafsAvail
With the current number of DS0 and SAF
connections, this field specifies the number of
SAF connections that could still be made
assuming no more DS0 connections are made.
RTM Port Application Status
This view provides the following fields.
Addr
The RTM port address.
FmtRevision
A read-only field giving the format revision of the
AD-x.
Type
A read-only field giving the type of the Ad-x unit,
either
ad3 or ad7 .
SubType
A read-only field that can have a value of
integralInt , daughterBrdInt , or
sipexChipInt . In the case of integralInt , all
interfaces are V24 (AD-3I/AD-7I subtype). In the
case of
daughterBrdInt , the interface type is
determined by reading the
restRtmAdPortElIntStatus MIB attribute (AD-
3N/AD-7N subtype). In the case of
sipexChipInt ,
you may program the interface type; however, this
may not be supported in your release of the
product.
AssemblyNum
A read-only value giving the AD-x unit assembly
number.
MotherBrdAssmNmb
A read-only value giving the mother board
assembly number.
Serial Nmb
A read-only value giving the Ad-x unit serial
number.
ManufactDate
A read-only value giving the Ad-x unit
manufacture date.
RamSize
A read-only value giving the Ad-x unit RAM size.
ModDiagResult
A read-only value giving the AD-x unit internal
diagnostics result. The bit mask is: bit 0 (LSB)
equals RAM test; bit 1 equals U-interface D-