Specifications

ST1kRtmApp RTM Specific Status
SPECTRUM Enterprise Manager 88 of 194 Ascom TimePlex ST-1000
ad7 will allocate all of the access device ports with
their default parameters.
PartitionID
A read-write field giving the partition identifier.
The default value is the partition ID of the node.
AD-3 and AD-7 Port Configuration
Table
This table provides the following fields.
Addr
A read-only field giving the RTM port address.
StartMode
A read-write field having a value of automatic ,
erase , or off (the default value). Erase resets all
parameters to their default values.
Update
A read-only field having the value
loaded or
resetReq (the default value).
Speed
A read-write field giving the port speed. The
possible values are
s150 , s300 , s1200 , s2400 ,
s4800 , s8000 , s9600 , s14400 , s19200 , s32000 ,
s38400 , s48000 , s56000 , s64000 (the default
value), and
s128000 . If the speed is set to s56000
and AdPortDataBits is set to
b7 , the channel will
be transported as a 64000 bit stuffed channel. If
the speed is set to
s56000 and AdPortDataBits is
set to
b8 , the channel will be a subrate channel.
AdPortDataBits
A read-write field having a value of b7 or b8 (the
default value).
b7 cannot be used in subrate
connections.
PortCommMode
A read-write field having the value
async or sync
(the default value).
PortType
A read-write field having the value
io or null (the
default value).
RTM Specific Status
This view provides the following read-only fields.
Addr
The RTM port address.
DSOsUsed
The current number of DS0 connections from AD-
x units on this module.
DSOAvail
With the current number of DS0 and SAF
connections, this field specifies the number of