Specifications

ST1kAd10App AD 10 Statistics
SPECTRUM Enterprise Manager 85 of 194 Ascom TimePlex ST-1000
10 voice port command can be used to
synchronize them.
OOSAudio
A read-write field that gives the OOS audio signal
condition for AD 10 voice ports. The possible
values are
fastBusy and silence .
CelpNetSigMd
A read-write field that can have the value auto ,
st , or link . This field enables autodetection of
CELP/ATC channel connected equipment to
automatically change format to become
compatible with either LINK (5 byte) or ST (8 byte)
channel mode. Alternately, this field hard sets
CELP/ATC channels to be compatible only with
either LINK or ST mode compatible equipment.
CelpNetSigSt
A read-only field having the value
indeterminate , st , or link . When
TrkGrpCelpNetSigMd is set to
auto
(autodetection mode), this field indicates whether
the CELP/ATC channel connected is running in
either LINK (5 byte) or ST (8 byte) mode. If the
channel is not connected, if it is running some
other type of voice mode, or if the channel is not
currently maintaining validated channel signaling
synchronization, this field will indicate
indeterminate . If autodetection is disabled, this
parameter reflects the value of
TrkGrpCelpNetSigMd.
AD 10 Statistics
This view contains three areas; Voice Port
Statistics, Packet Band Statistics, and Data Port
Statistics.
Voice Port Statistics
This view provides the voice port addresses and
the following read-only counters for each address:
PortHber, SyncLoss, BertByte, and BertBitErr.
Packet Band Statistics
This view provides the voice port addresses and
the following read-only counters for each address:
TxTotFrame, RxTotFrame, RxSCCOvrRun,
TxSCCUndRun, RxSCCAbort, RxInvDlci,
RxFrOvrSiz, and RxCrcErr.
Data Port Statistics.
This view provides the voice port addresses and
the following read-only counters for each address:
TxTotFrame, RxTotFrame, RxFrSeqErr,
RxFrHdrErr, RxCongDisc, TxCongDisc,