Specifications

ST1kAd10App AD 10 Status Administration
SPECTRUM Enterprise Manager 84 of 194 Ascom TimePlex ST-1000
Wire
A read-write field that can be set to
w4wire ,
w2wire , or notApplicable .
Ac15Dial
A read-write field that can be set to dtmf , pulse ,
or
notApplicable .
TelcoIntType
A read-write field that can be set to us , babt , or
auste .
Speed
A read-write field giving the compressed channel
data rate for this AD 10 voice port. The possible
values are listed below, with the default being
disabled .
This field must match the value for the AD 10
voice port speed. If it does not match, the reset
AD 10 voice port command can be used to
synchronize them. For ports using a CELP
compression algorithm, only speeds of 5.333
Kbps, 7.2 Kbps, 8 Kbps, and 9.6 Kbps are
supported. For ports using the ATC compression
algorithm, only the speeds between 7.466 Kbps
and 32 Kbps are supported.
CompressMode
A read-only field having a value of
tCelp or atc .
This field must match the value of the AD 10 voice
port compress mode. If it does not match, the
reset AD 10 voice port command can be used to
synchronize them.
FaxMode
A read-only field having the value of
faxIIIenable-NSFenable , faxIIIenable-
NSFdisable
, or faxIIIdisable-NSFdontcare .
This field must match the value the AD 10 voice
port fax mode. If it does not match, the reset AD
b5333 b7200 b7466 b8000
b8533 b9066 b9600 b10133
b10666 b11200 b11733 b12266
b12800 b13333 b13866 b14400
b14933 b15466 b16000 b16533
b17066 b17600 b18133 b18666
b19200 b19733 b20266 b20800
b21333 b21866 b22400 b22933
b23466 b24000 b24533 b25066
b25600 b26133 b26666 b27200
b27733 b28266 b28800 b29333
b29866 b30400 b30933 b31466
b32000 disabled