Specifications

ST1kAd10App AD 10 Status Administration
SPECTRUM Enterprise Manager 83 of 194 Ascom TimePlex ST-1000
This button provides the following fields.
Addr
The AD 10 port address.
Mode
A read-write value that sets the mode. The
possible values are
offline , online ,
disableDiagnosis , subDMW , bertTowardNetwork ,
loopSub , and loopNet .
Interface
A read-write value that sets the interface. The
possible values are
fxo , fxsGndStartContRing ,
fxsGndStartInterRing , fxsLoopStartContRing ,
fxsLoopStartInterRing , emTypeI , emTypeII ,
emTypeIII , emTypeIV , emTypeV , ac15 , and ss5 .
EchoCancel
A read-write field used to enable or disable echo.
The possible values are
enable and disable .
ToneMode
A read-write field used to enable or disable tone
mode. The possible values are
enable and
disable .
NonLinear
A read-write field used to enable or disable
nonlinear. The possible values are
enable and
disable .
EMPolarity
A read-write field used to set EM polarity. The
possible values are
reverse , normal , and
notApplicable .
UnCfgCktSig
A read-write field that can be set to idle or busy .
HookStateRx
The phone on/off hook status, which is a read-
write field that can be set to
on or off .
HookStateTx
The phone on/off hook status, which is a read-
write field that can be set to
on or off .
TxLevel
A read-write field that can be set from -25.4db to
+25.4db in 0.2db increments.
RcvLevel
A read-write field that can be set from -25.4db to
+25.4db in 0.2db increments.
Termination
A read-write field that can be set to r600ohms or
r900ohmsOrComplex .
Voice Port Status