Specifications

ST1kAd10App AD 10 Status Administration
SPECTRUM Enterprise Manager 81 of 194 Ascom TimePlex ST-1000
PktTxFlow
A read-write field giving the transmit flow. The
possible values are
enable and disable .
PktRxFlow
A read-write field giving the receive flow. The
possible values are
enable and disable .
PktBuildTimeOut
The build packet time out, given in units of 10
milliseconds (for async only).
PktRsThreshold
The receive threshold, ranging from
0 to 100 . If
the receive buffer capacity is beyond this
threshold, the flow control signal will send toward
the network.
PktTxThreshold
The transmit threshold, ranging from
0 to 100 . If
the transmit buffer capacity is beyond this
threshold, the flow control signal will send toward
the network.
PktMinRxFrag
The minimum receive fragment threshold, having
a value of
1 to 200 . This read-write field specifies
the minimum number of packet fragments
received from the network before sending toward
the DTE.
BiSyncCharType
A read-write field giving the bisync character type.
The possible values are
ascii7 , ascii8 , and
ebcdic .
BiSyncPatity
A read-write field giving the bisync parity. The
possible values are
high , low , even , odd , and
notApplicable .
BiSyncIdleFill
A read-write field giving the bisync idle fill. The
possible values are
idle and sync .
BiSyncMinPair
A read-write field giving the minimum number of
sync character pairs that precede a packet. The
possible values are
1 to 16 .
BiSyncSyncChar
A read-write field giving the bisync sync
character. The default is
32h for EBCDIC and 16h
for ASCII 7 and 8.
BiSyncPadChar
A read-write field giving the bisync pad character.
The default is
0xff for EBCDIC and ASCII 8 and
0x7f for ASCII 7.
HdlcCrcType
A read-write field giving the CRC type. The
possible values are
crc16 and crc32 .