Specifications

ST1kAd10App AD 10 Status Administration
SPECTRUM Enterprise Manager 78 of 194 Ascom TimePlex ST-1000
VerLabel
A read-only field giving the version in the format
Vxx.yy DATE:mm-dd-yy. The date is a date stamp
on the version number.
UnitType
A read-only field having a value of
atixSt50 ,
accessPlus , ad10 , or universalType .
HWconfig
The AD 10 hardware configuration map. For each
port on the AD 10 there is a one-byte port type
field followed by a five-byte user port address. The
port type field can have the following values:
• 0x01: control processor
• 0x11: packet band
• 0x20: IOP data port
• 0x22: hybrid data module (HDM) data port
• 0x23: expansion data module (EDM) data port
• 0x32: VF51-64K VFAX
• 0x40: V.35/RS422 network port
• 0x41 V.11 network port
The user device port address will be an ASCII
string displaying the port address as seen from
the back panel of the AD 10. The index for the
table is a virtual port address in the range 1 to 64.
This button within the Agm Port Status area of
the AD 10 Status Administration view lets you
determine the status of the tdmMuxSwitch
command as either
active or inactive .
This button within the Agm Port Status area of
the AD 10 Status Administration view lets you
determine the AD 10 network port interface and
port clock. The possible port interface values are
rs232 , v35 , rs422 , and v11 . The possible clock
values are
external , slave , or internal .
This button within the Agm Port Status area of
the AD 10 Status Administration view provides
access to the following fields.
Addr
The AD 10 port address.
Status
The current AD 10 softload status. The possible
values are
softloading , success , idle ,
Configuration Download Status Information
Network Port Status Information
Softload Status Information