Specifications

ST1kLgmApp LGM Port Administration
SPECTRUM Enterprise Manager 60 of 194 Ascom TimePlex ST-1000
ST1kLgmApp
This section provides LGM port utilization, configuration, and status information and statistics.
The Icon Subviews menu for this application
provides access to the device specific views listed
below.
• LGM Port Administration on Page 60
• LGM Routing Table on Page 62
• LGM Resource Administration on Page 62
• LGM Translation Administration on Page 63
• LGM Module Status on Page 63
• LGM Port Status on Page 64
• LGM Port Statistics on Page 65
LGM Port Administration
This view provides the following fields.
PortAddress
A read-only field that gives the virtual port
address.
StartMode
A read-write field having the value of either
automatic , erase , or off (the default value).
Setting it to
erase will fail if the LGM port has any
non-removed channels. If successful, it displays
the initial port configuration (with its default
values) and erases any channels defined on this
port.
Update
A read-only field that gives the LGM port status.
The possible values are
loaded , updateReq , and
resetReq (the default value).
Arq
A read-write field that specifies ARQ speed in bps,
which may not exceed 9600, The possible values
are
3200 , 6400 , and 9600 (the default value).
Group
A read-write field intended to force channels to
use specific groups of LGM ports. There can be up
to seven groups for each LGM port. Bit map bits 1
through 7
indicate the group(s) of the LGM. The
default value is 7.