Specifications

ST1kModuleApp Port Status Administration
SPECTRUM Enterprise Manager 58 of 194 Ascom TimePlex ST-1000
4 = CTS if DTE, reserved if DCE
5 = DTR if DTE, DSR if DCE
6 = RTS if DTE, DCD if DCE
7 = indicates functions are not applicable
8 = reserved if DTE, CTS if DCE
Module types and subtypes that do not support
this attribute will display a value of
x40.
SdmT Function
This field applies primarily to SDM ports. The
bit map is
1 = TM if DTE, LL if DCE
2 = reserved if DTE, RL if DCE
3 = reserved
4 = reserved
5 = LL if DTE, TM if DCE
6 = RL if DTE, reserved if DCE
7 = reserved
8 = indicates test functions not applicable
Module types and subtypes that do not support
this attribute will display a value of
x80 . In
addition, for the SDM, test functions will be not
applicable (
x80 ) if KG-resync is enabled.
BundleInTone
A read-only field having a value ranging from
0 to
31 .
SdmSignalStatus
Only applies to SDM ports on modules of
hardware subtypes 33 (4 ports E1 balanced) and
34 (4 ports E1 unbalanced); otherwise, it will
display
notApplicable . The possible values are
los , los event , or notApplicable .
SdmBipolarViolationInd
Only applies to SDM ports on modules of
hardware subtypes 33 (4 ports E1 balanced) and
34 (4 ports E1 unbalanced); otherwise, it will
display
notApplicable . The possible values are
event , no event , notApplicable .