Specifications

ST1kModuleApp Port Status Administration
SPECTRUM Enterprise Manager 55 of 194 Ascom TimePlex ST-1000
Module Type
The possible values are
ncp , t1m , e1m , sgm , lgm ,
asm , fsm , sdm , rtm , brm , dsm , e3m , or vfm .
Recovery Indicator
Indicates whether this object file is stored in the
softload recovery area. The possible values are
recovery or normal .
Compress Indicator
Indicates whether this object file is compressed or
uncompressed .
FileVersionNumber
The software revision number of this module
object file.
FileSize
The size of the module object file in bytes.
FileStoredCrc
The stored CRC of this module object file.
FileCrcCheck
If
pass is displayed, the file image in flash passed
a CRC check. If
fail is displayed, the CRC check
failed and the file is corrupted. If
not applicable
is displayed, there is no support for CRC checking
for this file on this NCP.
Port Status Administration
This view provides the following fields.
Port Address
A read-only port address string.
Status
A read-only field that shows either active ,
standby , maintenance , inactive , or failed .
Substatus
A read-only field displaying one of the following
values.
enabled no bandwidth rts detected invalid config
removed server port
disconnected
connected to test port
port reset engine failure invalid INL assignment
module
deleted
module reset invalid message received
disabled out of memory rts loopback failure
loopback module failure exceeded module capacity
port
deleted
hardware
failure
no configuration
port
removed
condition
change
ncp detected invalid config