Specifications

ST1kModuleApp NCP Module Status
SPECTRUM Enterprise Manager 54 of 194 Ascom TimePlex ST-1000
StartupDiagResults
Each bit displays the result (pass/fail) of a
startup diagnostic. The bit map for the first four
bytes is defined in StartDiagMask. The bit map
for the last four bytes is defined in
StartDiagMaskExt.
BgDiagResults
Each bit displays the result (pass/fail) of a
background diagnostic. The bit map for the first
four bytes is defined in BgdDiagMask. The bit
map for the last four bytes is defined in
BgdDiagMaskExt.
NumActivePorts
The number of ports on this module that have a
PortStatus value of
active .
NumNormalPorts
The number of ports on this module that have a
PortStatus value of
normal .
NCP Module Status
This view provides the following fields.
Addr
A read-only field giving the slot address.
Boot Prom Revision
A read-only field.
MacAddr
A read-only field.
Flash Object Versions
A read-only field. The information in this field has
been replaced by the restNcpFlashTable section of
the MIB. For each module type whose runtime
software is stored in the NCP flash PROM, this
field displays the software type (2 bytes), CRC (2
bytes), and version number (4 bytes). The values
for software type match the enumerations for the
Softload Software Type field in the view Partition
and Softload Administration on Page 25 found in
the St1kNodeApp. If the flash PROM of the NCP
cannot currently be read (such as when a softload
is in progress), this field displays eight bytes with
all zeros.
NCP Flash PROM Status
This view provides the following fields.
Flash Index
Used to differentiate the different module object
files in the NCP flash PROM. This field does not
contain any information about the file in flash.
Flash Address
The address of the NCP.