Specifications

ST1kModuleApp Slot Status
SPECTRUM Enterprise Manager 53 of 194 Ascom TimePlex ST-1000
Slot Status
The Slot Status Administration view contains the
following fields.
Slot Address
A read-only field displaying the slot address.
Failure Type
If Status is
fail , this field indicates what type of
failure occurred.
not applicable is displayed if
the module status is not
fail . no RTS means that
the module's runtime software is not on the NCP
flash.
Status
A read-only field that displays either
active ,
standby , fail , removed , busDisable , loading ,
or
initializing .
Condition
A read-only field that displays either normal or
exception .
SWModuleType
Displays the operation mode of the module
(usually the same as the module hardware type).
SWSubType
Same possible values as the ModSubType field in
the Slot Configuration view.
ModuleIDFormat
A read-only integer value.
HWModuleType
The type of hardware module either
ncp , lxm , rxm ,
t1m , e1m , sgm , lgm , asm , fsm , sdm , rtm , brm, dsm ,
e3m , or vfm .
HWModuleSubType
Same possible values as the ModSubType field in
the Slot Configuration view.
ModuleAssemblyNum
A read-only field.
Slot Address
A read-only field.
Revision
A read-only field.
Serial Num
A read-only field.
DateMode
A read-only field.
ActiveRedundant
A read-only field.
SWRevision
A read-only field.