Specifications

ST1kModuleApp Slot Configuration
SPECTRUM Enterprise Manager 51 of 194 Ascom TimePlex ST-1000
• Background diagnostics mask bits for NCP
are listed below.
NOTE: Additional tests for the NCP are
defined in BgdDiagMaskExt in the Detail
view. NCP will ignore bits 1, 28, and 30. These
tests will always cause hard errors if they fail.
• Background diagnostics mask bits for FSM
1 = reserved, 2 = Buffer pool, 3 through 32 =
reserved
• Background diagnostics mask bits for DSM
1 = reserved, 2 = Buffer pool, 3 through 32 =
reserved
There are no background diagnostics for the T1M,
E1M, E3M, SDM, SGM, RTM, LGM and BRM. The
default is to ignore all tests. The default value is
00000000 .
PortDiagMask
This mask allows a module to be online or
standby even though some items as marked by
the mask have failed port startup diagnostics. For
all tests, a bit set 1 means the module will not
operate if the corresponding diagnostics has
failed. Each byte indicates the diagnostic mask of
a port.
• For T1M and E1M ports
1 = (lsb of each byte) Register access, 2 =
Loopback, 3 = HDLC, 4 through 8 = reserved
• For FSM ports
1 = (lsb of each byte) HDLC, 2 through 8 =
reserved
• For DSM ports:
1 = (lsb of each byte) HDLC, 2 through 8 =
reserved
• For RTM ports:
1 = (lsb of each byte) Loopback, 2 through 8 =
reserved
• For E3M ports, Octets 1 and 2 are for ports 1
and 2
Bit Attribute Bit Attribute
1 ID PROM 22 ASM RTS
2-11 reserved 23 RTM RTS
12 Security MIB Db 24 Utility
13 Resource MIB Db 25 Boot PROM
14 Alarm MIB Db 26 Flash PROM map
15 Db version no. 27 NCP image
16 T1M RTS 28 Bus frame
17 E1M RTS 29 reserved
18 FSM RTS 30 PLL
19 MIB schema 31 reserved
20 SDM RTS 32 Code guard
21 SGM RTS