Specifications

ST1kAccessApp Access Control
SPECTRUM Enterprise Manager 37 of 194 Ascom TimePlex ST-1000
Community Access Control
Administration
This area of the Access Control view contains the
seven buttons described below.
Mib2 Access Control
This button in the Access Control view accesses
the following fields.
Index
A read-only field. The first two bytes of this index
are a partition ID with a range of
1 to 1023 . There
can be at most 32 partitions for a single node,
and each partition must already have a
corresponding node access table entry defined.
The last two bytes are an entry ID with a range of
1 to 5 . For each partition, up to 5 entries may be
defined.
System
Defines access rights for a community entry to
the MIB-II system group. The possible values are
noAccess , readOnly , and readWrite .
Interface
Defines access rights for a community entry to
the MIB-II interface group. The possible values
are
noAccess , readOnly , and readWrite .
At
Defines access rights for a community entry to
the MIB-II AT group. The possible values are
noAccess , readOnly , and readWrite .
IP
Defines access rights for a community entry to
the MIB-II IP group. The possible values are
noAccess , readOnly , and readWrite .
ICMP
Defines access rights for a community entry to
the MIB-II ICMP group. The possible values are
noAccess , readOnly , and readWrite .
UDP
Defines access rights for a community entry to
the MIB-II UDP group. The possible values are
noAccess , readOnly , and readWrite .
SNMP
Defines access rights for a community entry to
the MIB-II SNMP group. The possible values are
noAccess , readOnly , and readWrite .