Specifications

ST1kAccessApp Access Control
SPECTRUM Enterprise Manager 36 of 194 Ascom TimePlex ST-1000
ControlMode
A read-write field having a value of
enable ,
erase , or disable (the default value).
IP Address
The IP address of the unit that will receive traps.
Node Access Administration
This area of the Access Control view provides the
following fields.
Index
A read-only field having an integer value of
1
through
1023 . This field provides for a maximum
of 32 partitions per node. If the node is a
dedicated CNMS node, only the entry for CNMS
(partition ID 1) exists. The rest of the entries are
empty. If the node is a dedicated user node, only
the entries for CNMS (partition 1) and the
partition ID of the user device exist. The rest of
the entries are empty. If the node is a shared
node, the entry for CNMS (partition 1) always
exists. Thirty-one other entries with partitions 2
through 1023 can be created. These entries
represent user device partitions that have access
to the node.
Control Mode
A read-write field having a value of
fullAccess ,
tableAccess , disable , or erase . fullAccess will
only check the requester's partition ID.
tableAccess will use the root node list to verify the
requester's partition ID and node number.
disable means that the entry is not in effect. The
CNMS entry cannot be set to
disable . erase will
erase this entry. The CNMS entry cannot be set to
erase .
Update
Indicates whether the current throughput value
has been loaded. The possible values are
loaded
and
updateThroughputReq (the default value).
RootList
A list of up to 16 root nodes (2 bytes per node
number) within the partition that have access to
this node. This list is only used if Control Mode
is set to
tableAccess .
ChPrfList
A bit map representing which channel profiles (1-
255) are assigned to this partition. The right-most
bit of the right-most octet (lsb of the last byte)
represents channel profile 1. A channel profile
can be assigned to multiple partitions.
Throughput
The access bandwidth (
0 through 2147483647 ) for
this partition, in units of bps. This field is only
used on a shared node.