Specifications

St1kNodeApp Hardware Resource Engine Administration
SPECTRUM Enterprise Manager 33 of 194 Ascom TimePlex ST-1000
Id
The engine ID on the module.
Status
The engine status, either
removed (logically
removed),
normal , or failed (engine failure).
Application
The type of application allocated to this engine, if
any.
Max Ports
The maximum number of application ports on
this engine.
Num Ports
The number of application ports on this engine.
Max SAFs
The maximum number of SAF ports on this
engine.
Num SAFs
The number of SAF ports on this engine.
Max SCFs
The maximum number of SCF ports on this
engine.
Num SCFs
The number of SCF ports on this engine.
Max Load
The total load capacity.
Cur Load
The percentage of maximum load capacity that is
in current use.
Sub-Status
If an engine fails, this field indicates the reason
for the failure; otherwise,
none is displayed. The
possible values are
startupDiagnosticsFailure , noWellandAlive ,
and
none .
Hardware Resource Engine
Configuration
This area of the Hardware Resource Engine
Administration view contains the following fields.
Module Addr
The address of the module that this engine is
located on. The format is <nest>.<slot>.
Id
The engine ID on the module.
Start Mode
Controls whether the engine should start as
inserted or removed when the module comes up.
If the value is set to
automatic , the engine will
start as inserted. Otherwise, it will start as
removed. The possible values are
automatic and
offline.