Specifications

St1kNodeApp Node Status
SPECTRUM Enterprise Manager 28 of 194 Ascom TimePlex ST-1000
copyToOnline means that a file is being
transferred from the flash recovery area to its
proper location in flash.
success means that a
download completed with no errors. Any other
value indicates that an error occurred during a
softload.
Softload Size
The number of bytes softloaded. Divide this value
by the value of Softload Total to determine the
completion percentage. If no softloading is in
progress, this value is
0 .
Softload Total
Total number of bytes to be softloaded. If no
softloading is in progress, this value is
0 .
Softload Software Type
Indicates the type of software being transferred if
a softload is in progress.
notApplicable is
displayed if no softload is in progress.
Upload Status
Each upload client, which is used to upload files
to SNMS or to other nodes, is represented by one
octet. There are a maximum of eight upload
clients per ST-1000 node. The possible values for
a single octet (that is, a single upload client) are
the following:
idle (36) means no upload has
occurred;
uploading (68) means upload is in
progress;
success (65) means upload completed
successfully; noResource (106),
transmitFailure (107) , and receiveFailure
(108) indicate specific upload failures, and
failure (43) means reason unknown.
Upload Size
The number of bytes that have been uploaded to
each of up to eight clients. Each client uses four
bytes for its value. Divide each client's value in
this field by the corresponding value in Upload
Total to determine the completion percentage. If
no uploading is in progress, the value for that
client will be
0 .
Upload Total
The total number of bytes to be uploaded to each
of up to eight clients. Each client uses four bytes
for its value. If no uploading is in progress, the
value for that client will be
0 .
Upload Client ID
The node numbers of the eight clients that this
node is serving during an upload. Each client is
identified by two bytes. If the client is an EMS, the
value will be
xFFFE .
The following fields are in the Clock Information
view, which is accessed by clicking Clock
Information in the Node Status view.