Specifications

St1kNodeApp Partition and Softload Administration
SPECTRUM Enterprise Manager 25 of 194 Ascom TimePlex ST-1000
Partition and Softload
Administration
This view contains the three areas described
below, i.e., Security Partition Entry, Configuration
Partition Entry, and Security Softload Entry.
Security Partition Entry
This area of the Partition and Softload
Administration view contains the following fields.
Sec. Partition Control
A write-only field that can be validateCRC or
invalidateCRC.
Sec. Partition CRC Check
A read-only field that can be succeed or fail.
Sec. Partition Flush Mode
A write-only field that can be enable or disable.
Configuration Partition Entry
This area of the Partition and Softload
Administration view contains the following fields.
Config Partition Control
A write-only field that can be validateCRC or
invalidateCRC.
Config Partition CRC Check
A read-only field that can be succeed or fail.
Config Partition Flush Mode
A write-only field that can be enable or disable.
Security Softload Entry
This area of the Partition and Softload
Administration view contains the following fields.
Softload Dest Port
A read-write value that identifies the destination
module or port for downloading software. A
module address uses the format nest:slot:0. If
the address is 0:0:0, the file will be downloaded
to the active NCP.
Softload File Name
Specifies the file on an EMS or CPS station to be
downloaded into NCP program store. The type of
code in the file is indicated by Softload Software
Type.
Softload Ems Node ID
A read-write field that gives the root node ID for
the source EMS or ST-1000 node.
Softload Timeout
A read-write field that indicates the number of
seconds that the ST1000 will wait during a