Specifications

St1kNodeApp System Profile Administration
SPECTRUM Enterprise Manager 24 of 194 Ascom TimePlex ST-1000
Master Clock List
A read-write value indicating up to 16 master
clock nodes, with two bytes used for each node
number.
Cpi System Profile
The following fields are provided:
Cpi Profile Update
Indicates whether the CPI password control, CPI
session timeout time, CPI maximum number of
passthrough sessions, or any of the three CPI
passwords have been changed since the last
update CPI profile command was invoked.
Cpi Session Timeout
The CPI session will terminate when no request is
made for the number of minutes indicated by this
field. For the CPI port, this timeout only occurs if
password control is enabled. For the modem port,
the session can terminate regardless of the
password control state and the port will switch to
an NMS session in SLIP mode.
Cpi Max Passthru Sessions
Indicates the maximum number of CPI access
device passthrough sessions that can be active
simultaneously.
Cpi Password Control
Indicates whether CPI access is controlled using
passwords. This field and the three CPI
passwords apply to CPI access through the CPI
port, through the modem port, and through
access devices.
Cpi Password Level 1
This password allows both read and write access
to both local and remote nodes if password
control is enabled. It applies to users accessing
the node from the CPI port, modem port, or an
access device.
Cpi Password Level 2
This password allows both read and write access
to the local node and read-only access to the
remote nodes if password control is enabled. It
applies to users accessing the node from the CPI
port, modem port, or an access device.
Cpi Password Level 3
This password allows read-only access to both
local and remote nodes if password control is
enabled. It applies to users accessing the node
from the CPI port, modem port, or an access
device.