Specifications

St1kNodeApp System Profile Administration
SPECTRUM Enterprise Manager 23 of 194 Ascom TimePlex ST-1000
network; dedicatedNode, which is dedicated to
the user device or the CNMS; or sharedNode,
which is owned by the CNMS with resources on
the node allocated to multiple user partitions.
Database Version
A read-only value indicating the non-volatile RAM
database version number. If this number does not
match the internal version number used for the
revision of NCP code running at node startup, the
database will be flushed. In this event, you can
reconfigure the node and reset it to put the node
back into operation.
Node Control
A selector button used to set control to one of the
following values: resetNode resets the node;
validDateDatabase sets the database version
number to the value used for this revision of ST-
1000 software; invalidDateDatabase sets the
database version number to zero, which will flush
the database when the node is reset;
updateThroughput loads all of the throughput
values from the node access table; and
updateCpiProfile loads the CPI system information
(i.e., control. three passwords, the session
timeout value, and the maximum number of
throughput sessions).
Node Date
A read-write value that updates the NCP RTC
clock. The format is mm/dd/yyyy.
Node Partition Id
A read-write integer value, 1 being reserved for
the CNMS.
Node Update
A read-only field set to loaded when the node is
reset. The default value is resetRequired.
Node Time
A read-write value that updates the NCP RTC
clock. The format is hh:mm:ss.
Default Root
A read-write root value used by the trap generator
to send traps if there is no alarm log notification
list specified.
Master Clock System Profile
The following fields are provided:
Node Master Clock Priority
A read-write value indicating Master1 through
Master16 or Slave. The default value is Slave.