Specifications

St1kNodeApp Node Administration
SPECTRUM Enterprise Manager 21 of 194 Ascom TimePlex ST-1000
Contact
Information you enter that identifies a person to
contact, e.g., a name and phone number.
Description
Information you enter that identifies the ST-1000,
e.g., by its function in your organization.
Location
Information you enter that identifies the location
of the ST-1000 more definitively than Name, e.g.,
an address.
Number of Nest
The number of the nest that you enter. The
default is
1 . New numbers will not operate until
the restNodeDiagnostics(updateNest) MIB
attribute is updated.
Clock Switch
A drop-down selector button that can be set to
normal or fast.
Alarm Relay
A drop-down selector button that can be set to
enable or disable.
Node Clock Configuration
This area of the Node Administration view
contains the following fields.
Index
A read only integer from 1 to 8.
Start Mode
A read-write field that can be set to active or
erase. The default is active.
Update
A read-only field that indicates the need to update
the clock. The possible values are loaded or
updateRequired (the default value).
Type
A read-write value that can be set to internal,
station1, station2, portRxInd, portRxDep, or
portTx.
Station Speed
A read-write field that can be set to one of the
speed values listed below.
s2400 s3200 s3600 s4000
s4800 s5600 s6000 s6400
s7200 s8000 s8400 s9600
s12000 s14400 s16000 s19200
s24000 s28800 s32000 s38400
s40800 s48000 s50000 s56000
s57600 s64000 s72000 s76800
s80000 s96000 s112000 s128000