Specifications

ST1kDsmPortApp DSM Port Specific Administration
SPECTRUM Enterprise Manager 181 of 194 Ascom TimePlex ST-1000
The values between 1 and 127 are used for
DPNSS states. The values between 128 and 254
are used for Q.Sig states.
notApplicable is
displayed for the D-channel bundle if the DPNSS
protocol is used.
TransitState
A read-only field that indicates the transit call
control state of a virtual call from the point of
view of the DSM. The possible values are listed
below.
notApplicable is displayed for the D-
channel bundle if the DPNSS protocol is used.
setupComplete (9) callRejecting (10)
callClearing (11) callBarred (12)
preIdle (13) awaitRelease (14)
nullState (129) callInit (130)
overlapSending (131) outgoingCallProceeding (132)
callDelivered (133) callPresent (135)
callReceived (136) connectRequest (137)
incomingCallProceeding
(138)
callActive (139)
disconnectRequest (140) disconnectIndication (141)
suspendRequest (144) resumeRequest (146)
releaseRequest (148) callIndependentService (153)
overlapReceive (154) idleState (155)
establishWait (156) passiveAwaiting Conf(157)
callPassive (158) registerRequest (159)
]cancelRequest (160) asaiTr1State (161)
u10HoldRequest (162) u10TransferRequest (163)
u10ConferenceRequest
(164)
u10ReconnectRequest (165)
u10AwaitingDisc (166) u10CallOnHold (167)
deactivated (168) reactivateRequested (169)
deactivateRequested (170) nilHoldReqU3 (171)
nilHoldReqU4 (172) nilHoldReqU10 (173)
nilRetrieveU3 (174) nilRetrieveU4 (175)
nilRetrieveU10 (176) nilHoldActiveU3 (177)
nilHoldActiveU4 (178) nilHoldActiveU10 (179)
broadcastState (180) notApplicable (255)
inactive idle
awaitDigits awaitAdditionalDigits
overlap incomingCallProceeding
transitCallProceeding callAlerting
active awaitIncomingRelease
awaitOutgoingRelease awaitTwoWayRelease