Specifications

ST1kDsmPortApp DSM Port Specific Administration
SPECTRUM Enterprise Manager 178 of 194 Ascom TimePlex ST-1000
• 32: B-Channel Destination Slot ID
• 33-34: B-Channel Destination Port ID
• 35-36: B-Channel Destination Channel ID
• 37: Unused if the protocol is Q.Sig or CAS;
Call Type (with values of real or virtual) if the
protocol is DPNSS; or Current Call State (with
values dependent upon the variant) if the
protocol is ISDN-Q.931.
The following applies for the values ETSI Primary
Rate Network and National-2 Primary Rate
Network:
- null state - no call exists.
- call initiated - for an outgoing call, the
network has received a call establishment
request but has not yet responded.
- overlap sending - for an outgoing call, the
network has acknowledged the call
establishment request and is prepared to
receive additional call information (if any)
in overlap mode.
- outgoing call proceeding - for an outgoing
call, the network has sent an
acknowledgement that the network has
received all call information necessary to
effect call establishment.
- call delivered - for an outgoing call, the
network has indicated that the remote
user alerting has been initiated.
- call present - for an incoming call, the
network has sent a call establishment
request, but has not yet received a
satisfactory response.
- call received - for an incoming call, the
network has received an indication that
the user device is alerting but has not yet
received an answer.
- connect request - for an incoming call, the
network has received an answer but the
network has not yet awarded the call.
- incoming call proceeding - for an incoming
call, the network has received an
acknowledgement that the user device has
received all call information necessary to
effect call establishment.
- active - for an incoming call, the network
has awarded the call to the called user. For
an outgoing call, the network has indicated
that the remote user has answered the
call.
- disconnect request - the network has
received a request from the user device to
clear the end-to-end connection (if any).
- disconnect indication - the network has
disconnected the end-to-end connection (if
any), and has sent an invitation to
disconnect the user device-network
connection.