Specifications
Table Of Contents
- Title
- Notice
- Contents
- Introduction
- Performance Views
- Interface Device View
- Device Topology View
- Applications Views Summary
- St1kNodeApp
- ST1kAccessApp
- ST1kModuleApp
- ST1kLgmApp
- ST1kFsmApp
- ST1kSgmApp
- ST1kAd10App
- ST1kRtmApp
- ST1kChnlApp
- ST1kINLApp
- ST1kFrmRlyApp
- ST1kBundleApp
- ST1kE1PortApp
- ST1kT1PortApp
- ST1kSdmPortApp
- ST1kAsmApp
- ST1kVoiceApp
- ST1kAsmX50App
- ST1kDsmApp
- ST1kDsmPortApp
- ST1kAlarmApp
- Device Configuration View
- Model Information Views
- Index
ST1kDsmPortApp DSM Port Specific Administration
SPECTRUM Enterprise Manager 177 of 194 Ascom TimePlex ST-1000
D-Channel Port Virtual Status
Administration
This area of the DSM Port Specific Administration
view provides the following fields.
Addr
The address of the D-channel port associated
with this virtual call, in the format
type(131).group.port.
Bundle
A read-only field that identifies the virtual call to
be accessed. For the DPNSS protocol, this index is
a bundle number in the range of
1
to
31
. For the
Q.Sig protocol, this index is an artificial entity
and does not reflect any information about the
call origination time.
CDRContents
The Call Detail Record for a virtual call in
progress on a D-channel. Virtual calls are those
that do not involve B-channels. The bytes in a
CDR for a call in progress are interpreted as listed
below. (Note that this is the same as the
interpretation for CDRs associated with active
real calls on a B-channel.)
Part 1 Generic Information
• 1: CDR Type (with values of level 1, level 2,
active (also for Part 2 and 3), and not
applicable)
• 2: Version Number (1 for Release 3.1.0 and
higher nodes)
• 3-4: Partition ID
• 5-6: Call ID
• 7: Protocol (with values of DPNSS, Q.Sig,
ISDN-Q.931, or CAS)
• 8: Unused if the protocol is DPNSS or Q.Sig;
Variant Type (with values of ETSI primary rate
network, ETSI basic rate network, National-2
primary rate network, or National-2 basic rate
network) if the protocol is ISDN-Q.931; or
Variant Type (with values of DTMF VFM or
DTMF AD-10/FR2) if the protocol is CAS.
Part 2 Level 1: Physical Characteristics
• 9-12: Originating Time
• 13-16: Answer Time
• 17-20: Disconnect Time
• 21-22: B-Channel Source Node ID
• 23: B-Channel Source Nest ID
• 24: B-Channel Source Slot ID
• 25-26: B-Channel Source Port ID
• 27-28: B-Channel Source Channel ID
• 29-30: B-Channel Destination Node ID
• 31: B-Channel Destination Nest ID










