Specifications

ST1kDsmPortApp DSM Port Configuration
SPECTRUM Enterprise Manager 171 of 194 Ascom TimePlex ST-1000
CallsPerSecond
An estimate of the number of calls per second (in
units of 0.01 calls per second) on this D-channel
port. The default value is
1 .
BillRecordMode
A read-write field having a value of originator-
only
, terminator-only , originator-and-
terminator
, or offline (the default value). This
field controls the condition under which channel
endpoints using this D-channel will generate
billing records.
BillInfoStream
The billing information stream (if any) to be used
for B-channels that are managed by this D-
channel if the billing record collect mode attribute
is not set to offline.
CustomerId
The customer that uses this channel.
BChannelMode
A read-write field having a value of
associated
(the default value) or
disassociated . This field
indicates whether the B-channels that are
serviced by this D-channel are associated or
disassociated. An associated D-channel means
that the B-channels meet the following criteria:
the B-channels and D-channel are on the same
T1, E1, or BRM port; or the D-channel is
identified using the standard bundle number for
the interface type (24 for T1, 16 for E1, and 3 for
BRM). If either or both of the criteria are not met,
the D-channel must be defined as disassociated.
This means that you must define the resource
addresses of every B-channel in the DSM D-
Channel B-Channel Table.
DChPortChannelType
A read-write field having a value of
tdm (the
default value) or
packet . This field indicates
whether the D-channel is carried through the
TDM or the packet band of the ST-1000 network.
DChPortInterfaceType
A read-write field having a value of
t1 , e1 (the
default value), or
basic-rate . For disassociated
D-channels, this indicates the type of interface to
use when configuring the B-channel usage. For a
T1 interface, B-channels 24 through 31 cannot be
used. For an E1 interface, B-channel 16 cannot
be used. For a basic rate interface, B-channels 3
through 31 cannot be used. The value of this field
is ignored for associated D-channels.
DChPortBChSearchMode
A read-write field having a value of
lowToHigh
(the default value) or
highToLow . This field
indicates whether the DSM searches for an
available B-channel in low-to-high or high-to-low