Specifications

ST1kDsmPortApp DSM Port Configuration
SPECTRUM Enterprise Manager 169 of 194 Ascom TimePlex ST-1000
and sent to the ST. incoming allows calls
originating on the ST-1000 and sent to the PBX.
bidirectional allows calls in either direction
and is the default value for associated D-
channels.
none means this B-channel is not
allowed for use and is the default value for
disassociated D-channels. The value of this field
will be changed to the appropriate default when
the D-channel mode is changed between
associated and disassociated. Changes to this
field will be reflected in the DSM D-channel port
Update field. A port update is required for the
change to take effect. It will not disrupt any
channel connections associated with this D-
channel port.
D-Channel Port Administration
This area of the DSM Port Configuration view
provides the following fields.
Addr
The port address, in the format
type.group.port. The server type is 131.
StartMode
A read-write field having a value of
automatic ,
off (the default value), or erase . off means the
D-channel cannot be connected. In order to set it
to
erase , the D-channel must be disconnected.
Update
A read-only field having a value of
loaded ,
updateReq , or resetReq (the default value). When
it is set to
resetReq , you must reset the port
(which involves disconnecting and reconnecting
the D-channel) in order for the parameter
changes to take effect. When it is set to
updateReq , you can update the port without
affecting the D-channel connection in order for
the parameter changes to take effect.
PartitionID
A read-write field used for security on shared
nodes. The default value is the partition ID of the
node.
Protocol
A read-write field displaying the protocol used by
the device using this D-channel. This protocol
must match the equipment's protocol for the port
to come up. The possible values are
dpnss (the
default value),
qsig , isdn-q931 , and cas .
PbxLayer3Type
A read-write field that indicates whether the PBX
or DSM will be responsible for serving B-channels
requests (layer 3 master or slave mode). The
possible values are
slave and master (the default
value).
master means the DSM controls the
assignment of B-channels. The DSM will search
the B-channels starting from the low number