Specifications

ST1kDsmApp DSM Module Specific Entry
SPECTRUM Enterprise Manager 155 of 194 Ascom TimePlex ST-1000
Module CDR Implementation
Administration
This area of the DSM Module Configuration
Administration view provides the following fields.
Addr
The address of this DSM module.
Index
The CDR log to access.
ControlMode
A read-write field having a value of
enable ,
erase , or disable (the default value). Changes
will not affect channels that are already
connected.
Disable prevents new CDRs from be
recorded in this log.
Erase removes this CDR log.
Changes to this field are reflected in the slot
Update field. A module update is required for the
change to take effect. It will not disrupt channel
connections associated with this DSM.
Size
A read-write field that assigns the maximum
number of CDRs that may be stored in this CDR
log. The default is
0 . The total size of all CDR logs
on this module cannot exceed the number of total
records available. This number may be obtained
from the DSM Module Specific Status view
TotalRecCDRs field. When a new DSM module is
configured, CDR log #1 will be created with a size
of
1000 CDRs. Any other CDR logs that are
configured after this will have a default size of
0 .
Changes to this field will be reflected in the slot
Update field. A module update is required for the
change to take effect. It will not disrupt channel
connections associated with this DSM.
OvThrshld
A read-write field that defines an overflow
threshold on this CDR log. The default value is
0 .
When reached, the threshold flag is set and the
Threshold Exceeded alarm is issued. If this value
exceeds the value of the CDRLogSize field, the
Threshold Exceeded alarm will never be generated
for this CDR log. When a new DSM module is
configured, CDR log #1 will be created with a
threshold of
900 CDRs. Any other CDR logs that
are configured after this will have a default
threshold of
0 . Changes to this field will be
reflected in the slot Update field. A module
update is required for the change to take effect. It
will not disrupt channel connections associated
with this DSM.
PartitionID
A read-write field that specifies the partition ID of
this CDR log. The default value is
1 . Changes to
this field are reflected in the slot Update field. A
module update is required for the change to take