Specifications

ST1kDsmApp DSM Module Specific Entry
SPECTRUM Enterprise Manager 154 of 194 Ascom TimePlex ST-1000
PbxProtocol
A read-write field having a value of
dpnss (the
default value),
sig , isdn-q931 , or cas . All D
channels connected to this DSM module will need
to be set up with the same protocol as set here.
Changes to this field will be reflected in slot
Update field. A module reset will be required in
order for the change to take effect.
ActiveLev1CDRMode
A read-write field having the value
enable (the
default value) or
disable . This field specifies
whether level 1 Call Detail Record for the calls in
progress are to be generated by the DSM. This
field affects all the D channels terminated on this
module. Changes to this field will be reflected in
the slot Update field. A module update will be
required in order for the change to take effect. It
will not disrupt any channel connections
associated with DSM.
RecordLev1CDRMode
A read-write field having the value
enable (the
default value) or
disable . This field specifies
whether level 1 Call Detail Record for the
completed calls are to be generated by the DSM.
This field affects all the D channels terminated on
this module. Changes to this field will be reflected
in the slot Update field. A module update will be
required in order for the change to take effect. It
will not disrupt any channel connections
associated with DSM.
ActiveLev2CDRMode
A read-write field having the value
enable (the
default value) or
disable . This field specifies
whether level 2 Call Detail Record for the calls in
progress are to be generated by the DSM. This
field affects all the D channels terminated on this
module. Changes to this field will be reflected in
the slot Update field. A module update will be
required in order for the change to take effect. It
will not disrupt any channel connections
associated with DSM.
RecordLev2CDRMode
A read-write field having the value
enable (the
default value) or
disable . This field specifies
whether level 2 Call Detail Record for the
completed calls are to be generated by the DSM.
This field affects all the D channels terminated on
this module. Changes to this field will be reflected
in the slot Update field. A module update will be
required in order for the change to take effect. It
will not disrupt any channel connections
associated with DSM.