Specifications

ST1kAsmX50App ASM X50 Status
SPECTRUM Enterprise Manager 151 of 194 Ascom TimePlex ST-1000
ASM X50 Status
This view contains two areas described below, i.e.,
X50 Port Status and X50 Circuit Status
Administration.
X50 Port Status Administration
This field provides the following fields.
Addr
The port address.
Engine
A read-only field that indicates which DSP on the
ASM module the port has been allocated to.
RxHouseKbits
A read-only field. The bit to housekeeping bit map
is as follows: 0 (lsb) is H, 1 is G, 2 is F, 3 is E, 4 is
D, 5 is C, 6 is B, and 7 is not used.
CktTimeSlotMap
A read-only field. Each byte (1 through 20)
indicates which circuit is using that time slot.
AggrStatus
A read-only field giving the specific ASM X50
status as one of the following values:
pending ,
inSync , los , ros , losRos , oos , or loopback .
X50 Circuit Status Administration
This view provides the following fields.
Addr
The ASM X50 address.
CkSbitStatus
A read-only field having the value one or zero .
PhasorStatus
A read-only field having bit values as listed below.
Bit Indicates
1 (lsb) receive phasor underflow
2 receive phasor overflow
3 receive phasor empty
4 receive phasor full
5 receive phasor fifo error
6-7 reserved
8 receive phasor not applicable
9 transmit phasor underflow
10 transmit phasor overflow
11 transmit phasor empty
12 transmit phasor full
13 transmit phasor fifo error
14-15 reserved
16 transmit phasor not applicable