Specifications

ST1kAsmX50App X50 Configuration Administration
SPECTRUM Enterprise Manager 150 of 194 Ascom TimePlex ST-1000
PhasorSize
A read-write field having a value of
p4 , p8 , or p16
(the default value).
TxHouseKbits
A read-write field with a default value of
00h . The
following is the map between bits in the bit map
and housekeeping bits: bit 0 (lsb) is H, bit 1 is G,
bit 2 is F, bit 3 is E, bit 4 is D, bit 5 is C, bit 6 is B,
and bit 7 is reserved.
CircuitMap
A read-only field. Each byte indicates the usage of
the circuit on the X.50 aggregate.
1 means
defined and
0xFF means undefined.
PartitionID
A read-write value ranging from 1 through 1023 .
X50 Circuit Administration
This area of the X50 Configuration
Administration view provides the following fields.
Addr
The ASM X50 address.
StartMode
A read-write field having a possible value of
automatic , erase , or off (the default value).
Update
A read-only field having a possible value of
loaded or resetReq (the default value). If this
field is set to
resetReq , you need to reset the ASM
X.50 circuit.
Speed
A read-write field having a value of
s2400 , s4800 ,
s9600 (the default value), or s19200 .
TimeSlot
A read-write field having one of the values listed
below. The default is
a .
PhasorSize
A read-write field having a value of
p4 , p6 , p8 ,
p12 , or p16 (the default value).
SbitConnectState
A read-write field having the value zero or one
(the default value).
ab cd a b c
d e a1 a2 a3
a4 b1 b2 b3 b4
c1 c2 c3 c4 d1
d2 d3 d4 e1 e2
e3 e4