Specifications

Interface Device View Interface Status View
SPECTRUM Enterprise Manager 15 of 194 Ascom TimePlex ST-1000
Interface Status View
Access: From the Icon Subviews menu for the Interface
Device view, select IF Status .
This view lets you set the administrative status. It
provides the following information.
Operational Status
A read-only field displaying the current
operational state of the interface (ON, OFF, or
Testing).
Administrative Status
A menu button that lets you set the desired
operational state of the interface (ON, OFF, or
Testing).
Table 1 shows the possible interface states, the
Administrative label text display, and the
respective label colors.
Interface Address Translation
Table
Access: From the Icon Subviews menu for the Interface
Device view, select IF Address Translation Table.
This table cross-references the ST-1000 physical
addresses to the network addresses for the
selected Interface icon. Double-click any field in
the table to display a dialog box that lets you
update the physical and network addresses.
This table is accessed from the Interface
Configuration Table within the Device
Configuration view. The fields are described
below.
Interface Index
A unique value for each interface. Its value ranges
between 1 and the total number of interfaces.
Physical Address
The interface’s address at the protocol layer
immediately below IP (Internet Protocol) in the
protocol stack. The Ethernet address of the bridge
is displayed for both channels of the bridge.
Network Address
The network address of the interface.
Table 1: Interface Status Label Definitions
Operational
State
Administrative
State
Text
Display
Label
Color
ON ON ON Green
OFF OFF OFF Blue
OFF ON OFF Yellow
Testing Testing Test Red